Lighting

Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.

This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.

Set up a light wherever you can connect a GoPro mount. Use this adapter to connect your Imjin or Nip to any GoPro mounting option.

Seca 2500 is the world's ultimate trail light - its reliability, durable design, and trail-optimized beam pattern is unmatched. The newest generation of Seca features a robust waterproof construction, updated optics, enhanced firmware, and GoPro mount compatibility. Featuring: - 2500 Lumen output certified to the FL-1 Standard - IP67 Waterproof Rating (Submersible to 1 Meter) - Advanced electronics with regulated output to keep lumens steady through entire runtime - A 4 LED array using the best CREE LEDs and enhanced firmware. - Custom engineered reflector/optics diffuses the bottom LED to cover an ultra-wide spread down in front and focuses the top LEDs to penetrate the darkness and maximize riders' depth perception - Illuminated power button with enhanced engagement designed specifically for gloves - GoPro mount compatibility Included: - Handlebar mount, GoPro mount, helmet mount, 6 Cell battery, battery strap, Mini L 1.5 Charger (US/JP, UK, EU, AUS compatible)

Light & Motion Seca Comp 1500, Light up the whole trail with 1500 lumens of power. Designed for trails, the Seca Comp is also a superior road light with 4 modes for night and day safety and vision. - 3 CREE LEDs deliver a high power spot beam plus a wide flood beam for broad and deep coverage. - Quick handlebar mounting and easy to switch between bikes. - 3 modes for trail use, plus 9 hours of daytime safety on the road with SafePulse mode. - Waterproof: 1 meter depth rating (IP67 standard). - Impact resistant: 1 meter drop tested (FL-1 standard). - Powerful side markers for road safety can be turned off for trail rides. - Race mode offers one touch high/med toggle. - Fast USB charging with advanced internal circuitry. - Accurate battery status indicator. - GoPro mount available.

This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).

An ideal front and rear combo kit for the daily rider that values performance, reliability, and convenience. The Vis is a classic style headlight, with a button that gives the user 4 different modes to choose from. The smart Vya taillight features auto on/off technology with no buttons—just start riding and it automatically activates the SafePulse beam. High visibility is paramount and dedicated amber sidelights front and rear are distinct and easily recognizable by drivers, especially through intersections. Reliable construction is unmatched in the market and exceeds the needs of daily riders as both lights are certified to withstand 1-meter drops on concrete and are fully waterproof to ensure long-term reliability. Recharging is fast and efficient through Micro USB (Urban) or through direct USB (Vya). Blending the best-selling Urban 500 headlight with the state-of-the-art Vya, daily riders now have the perfect setup to stay safe and visible. Key Features - 500 Lumen Headlight and 50 Lumen Taillight certified to the FL-1 Standard with premium CREE LEDs - Visibility is enhanced with amber side lighting front and rear providing maximum safety through intersections and high-traffic areas - SafePulse beam pattern scientifically designed to enhance a passing driver's ability to judge the cyclist's distance and direction of travel without the risks associated with flashing lights - Vya Taillight features smart auto-on/auto-off technology for commuter convenience - Secure mounting with durable straps prevents lights from moving when riding on uneven/bumpy terrain - Quick release allows removal in seconds while leaving the base mount on the bike - Waterproof design eliminates the leading cause of bike light failure—water immersion - Charging is reliable and efficient through with included Micro USB cable (Urban) and through direct USB blade (Vya) Includes - Vis 500 Onyx Headlight - Vis/Urban Bar Mount - Vya Smart Taillight - Vya Taillight Mount - Micro USB Cable

The perfect bike headlight for city riders that want premium features with an entry-level price. High visibility is prioritized and the platform has dedicated amber sidelights that are distinct and easily recognizable by drivers, especially through intersections. City riders will appreciate the exclusive SafePulse beam, scientifically designed to provide the highest level of rider awareness without the risks associated with flashing lights. Easily mount on standard or oversize handlebars with a mount that provides enhanced grip and features quick release technology to remove in seconds. Reliable construction is unmatched in the market and exceeds the needs of daily riders. This is the only waterproof lighting platform with a certified IP67 rating—meaning the light is certified to withstand water immersion up to a depth of 1 meter. Commute with the added assurance knowing rain or shine the light will keep performing. Recharging is fast and efficient with the included Micro USB cable. All the innovative safety features of the premium Vis Lights with a value-based price, Vis 500 is the leader in its class. Key Features - 500 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Visibility is enhanced with bright amber side lighting providing maximum safety through intersections and high-traffic areas - Daylight visible pulse mode keeps cyclist safe without the inherent dangers of flashing lights - Micro-peened reflector optimizes the beam pattern for road riders providing a smooth, even spot beam void of distracting hard edges - Multiple power settings to achieve long runtimes for extended rides - Multi-color battery indicator is driven by custom firmware to provide accurate battery status throughout entire runtime - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn't slip on regular or oversize handlebars - Quick release allows the removal of the light in seconds while leaving the base mount on the handlebar - Waterproof design eliminates the leading cause of bike light failure - water immersion - Charging is reliable and simple with included Micro USB cable Tech Specs - Lumens: 500 (high), 250 (medium), 125 (low), 125 (pulse) - Runtime (minutes): 90 (high), 180 (medium), 360 (low), 720 (pulse) - Beam Angle: 20° (Spot) - Charge Time: 270 min - Fast Charge: No - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 121 grams - Product Dimensions: 1.2" x 1.2" x 4" - Compatible Mounts: Bar, GoPro, Helmet

Now there is a light that will keep up with ultra-endurance cyclists and bikepackers. Vis Pro 1000 blends impressive power with the ability to run all day on portable power. High visibility is paramount and the platform has dedicated amber sidelights that are distinct and easily recognizable by drivers, especially through intersections. City riders will appreciate the exclusive SafePulse beam, scientifically designed to provide the highest level of rider awareness without the risks associated with flashing lights. Easily mount on standard or oversize handlebars with a mount that provides enhanced grip and features quick release technology to remove in seconds. Reliable construction is unmatched in the market and exceeds the needs of daily riders. This is the only waterproof lighting platform with a certified IP67 rating—meaning the light is certified to withstand water immersion up to a depth of 1 meter. Commute with the added assurance knowing rain or shine the light will keep performing. When it comes time to recharge, plug the included Micro USB cable into any 2 Amp charger and the FC (Fast Charge) electronics ensure a full charge in 2.5 hours. With superior performance with innovative safety features, there is no substitute for the Urban 1000 when commuting by bike. Key Features - 1000 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Charge and light off portable battery power with an output of 150 lumens for daylight safety. - Visibility is enhanced with bright amber side lighting providing maximum safety through intersections and high-traffic areas - SafePulse light pattern scientifically designed for maximum driver awareness of approaching cyclist without the inherent dangers of flashing lights - Micro-peened reflector optimizes the beam pattern for road riders providing a smooth, even spot beam void of distracting hard edges - Multiple power settings include a one-touch High/Medium toggle to efficiently decrease intensity when full power is not needed - Multi-color battery indicator is driven by custom firmware to provide accurate battery status throughout entire runtime - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn't slip on regular or oversize handlebars - Quick release allows the removal of the light in seconds while leaving the base mount on the handlebar - Waterproof design eliminates the leading cause of bike light failure - water immersion - FC (Fast Charge) Electronics ideal for daily commuters that rely on lights day and night Tech Specs - Lumen Output: Max (1000) - Beam Angle: 20° (spot) - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter - Impact Resistance (FL-1): 1 meter - Thermal Management: Passive Cooling - Fast Charge: True - Product Dimensions: 4" x 1.2" x 1.2"

The perfect light for ultra-endurance gravel cyclists and bikepackers. Vis Pro 1000Trail blends impressive power with the ability to run all day on portable power. The impressive power provides an ideal range of vision with a pinged reflector to provide punch down the trail. Easily mount on standard or oversize handlebars with a mount that provides enhanced grip to ensure the light doesn't slip during critical downhill sections. Helmet mounting is quick and simple with the included helmet mount; this ultra-lightweight setup is barely felt when balanced on the helmet. For riders that already have GoPro mounts, the GoPro interface is included. Backing up the power of the light is reliable construction unmatched in the market. This is the only waterproof trail light with an IP67 rating—meaning the light is certified to withstand water immersion up to 1-meter depth. Ride with confidence, in any condition, knowing the light is up for the challenge. When it comes time to recharge, plug the included Micro USB cable into any 2 Amp charger and the FC (Fast Charge) electronics ensure a full charge in 2.5 hours. From after-work night laps to full-on 24-hour racing, the Trail 1000 is the choice for ultra-compact power. Key Features - 1000 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Charge and light off portable battery power with an output of 150 lumens for daylight safety - Multiple power settings include a one-touch High/Medium toggle so trail riders can rapidly switch power between climbs and descents without having to cycle through various settings - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn't slip on regular or oversize handlebars - Included helmet mount provides an ultra-lightweight and simple attachment solution so riders aren't encumbered by a bulky/heavy light setup - Waterproof design eliminates the leading cause of bike light failure - water immersion - FC (Fast Charge) Electronics ideal for 24 Hour Racing or for those that always forget to recharge their light from the previous ride Tech Specs - Lumens: 1000 (high), 500 (medium), 250 (low), 500 (SafePulse) - Runtime (minutes): 90 (high), 180 (medium), 360 (low), 720 (SafePulse) - Beam Angle: 20° (Spot) - Charge Time: 150 min - Fast Charge: Yes - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 121 grams - Product Dimensions: 1.2" x 1.2" x 4" - Compatible Mounts: Bar, GoPro, Helmet Includes - Vis Pro 1000 Trail - Vis/Urban Bar Mount - Gopro Mount - Micro USB Cable

Vya Smart Lights are a revolutionary concept incorporating technology to provide effortless safety in an ultra-compact, convenient design. Auto-on sensors, waterproof bio-renewable construction, and innovative safety features create the most technically advanced light available for cyclists. The Vya Commuter Combo is the perfect solution for riders that pedal in high traffic areas and want the added assurance of SafePulse visibility day and night. Features - 150 Lumen Headlight & 50 Lumen Taillight with variable SafePulse beam pattern optimized for maximum visibility day and night - Smart sensor technology senses motion and automatically turns lights on when inserted into mount; Auto-off when bike is parked removed from mount - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Beam patterns optimized to give a wide swath of light that can be seen clearly from the rear and side ideal for city riding - Extra long run-time perfect for riders who do not want to charge lights on a daily basis, Low battery status is indicated by rapidly flashing sidelights - USB Mount Receptor allows lights to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; lights will not turn on when removed from mount and slipped into a pocket or bag - Easy direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Headlight Specifications - Lumens: 50 (high), 50 (SafePulse) - Runtime: 480 min (high), 480 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min

Safety is job #1 and the Vya Series delivers premium safety with the convenience commuters love. Vya Switch is the latest addition to the Vya Family, foregoing auto on/off technology for a traditional button design. Why the new design? We had multiple requests from riders who loved the power and simple effectiveness of our Vya taillight but wanted to adjust runtime or change to a solid mode for group riding and bike path commutes. The button control also allows cyclocross and mountain bikers who hit pavement en route to the dirt the ability to turn the light on/off as needed. Oh yeah, did we mention the purists who are so accustomed to manually turning their lights on and off that not doing so creates that 'Did I forget Something' feeling? Yes control freaks – Vya Switch is for you! - 100 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Switch control provides multiple modes for longer runtime plus a solid mode perfect for bike paths/group rides - Designed for traditionalists, Vya Switch is turned on/off by button (does not have the auto on/off feature of other Vya Lights) - SafePulse beam pattern scientifically designed to enhance a passing driver's ability to judge the cyclist's distance and direction of travel without the risks associated with flashing lights - Horizontal design with custom optic gives a powerful, concentrated burst of light to be recognizable over 2KM away – perfect for road cyclists - 100 lumen SafePulse output maintains safety for a full 6 hours; for all-day adventures switch to 50 lumen SafePulse mode for an impressive 12 hours runtime - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) - Lumens: 100 (high), 50 (medium), 25 (low), 100 (SafePulse) - Runtime: 360 min (high), 720 min (medium), 240 min (low), 360 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min - Fast Charge: No - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 30 grams - Product Dimensions: 2.6" x 1.3" x 0.8" - Compatible Mounts: Seat Post

The future of cycling taillights is here. Vya is a game-changing design, blending powerful output with revolutionary smart features. The piercing 50 lumen output is easily visible over a distance of 1km, even in bright daylight. What separates Vya from traditional taillights are smart auto-on/off sensors – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in for stoplights. The scientifically designed SafePulse beam pattern not only gets noticed from motorists, but allows the driver to accurately judge distance from the rider and their direction of travel – a safety feature not possible with strobing lights. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and convenient. The next evolution in bike safety, Vya takes powerful safety lighting and keeps the rider safe so they can focus on the road ahead. Features - 50 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Smart sensor technology senses motion and automatically turns Vya on when inserted into mount and will remain on, even when a rider pauses at stoplights - Auto-off when bike is parked or light is removed from mount to prevent the dreaded ‘dead bike light’ when it comes time for the next ride - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Beam pattern optimized to give a wide red swath of light that can be seen clearly from the rear and side ideal for city riding - An impressive 8 hour runtime allows Vya to be used on multiple rides before needing a recharge, low battery status is indicated by rapidly flashing sidelights - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; light will not turn on when removed from mount - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Specifications - Lumens: 50 (SafePulse) - Runtime: 480 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

Compact, aero-post-compatible safety light featuring a Daytime Flash mode. Its co-molded construction is super-light, yet durable and has an IPX7 waterproof rating. NEW -- Up to 19.5 hours of runtime (6.5 hour increase) with highly improved optics. Its Wide Angle Lens offers up to 270° of visibility. The KTV Drive Pro Rear provides up to 75 lumens (Daytime Flash) and five output/flash modes. And it features an integrated USB stick for convenient cable-free recharging. Specs - Max Lumens: 75 - Weight: 45g - Max Runtime: 19:30 hours - Recharge Time: 3 hours

The LED Laser Drive rear light enhances nighttime safety by projecting "lanes" on the road behind you. Two laser lines establish your presence by creating a lane that shows motorists where you are and where you're headed. Two solid modes and five flashing modes ensure you're always seen, and recharges are made convenient through USB. Silicone rubber mounting strap included.

Front Compact cycling light with a machined aluminum body. A bright, single LED system provides up to 400 lumens and a Daytime Flash mode. Battery run-time has increased by 2.5 hours for up to 20 hours of run-time. It features eight output modes and cutouts for side visibility. Charging is simple with an integrated cable-free USB stick. It securely straps to a variety of handlebar shapes and sizes. Rear Compact, aero-post-compatible safety light featuring a Daytime Flash mode. Its co-molded construction is super-lightweight, yet durable and has an IPX7 waterproof rating. NEW -- Up to 19.5 hours of run-time (6.5 hour increase) with highly improved optics. Its Wide Angle Lens offers up to 270° of visibility. The KTV Drive Pro Rear provides up to 75 lumens (Daytime Flash) and five output/flash modes. And it features an integrated USB stick for convenient cable-free recharging. Specs - Max Lumens: 400 (front) / 75 (rear) - Weight: 83g (front) / 45g (rear) - Max Run-time: 20 hours (front) / 19:30 hours (rear) - Recharge Time: 2:30 hours (front) / 3 hours (rear)

PWR Commuter is a 450 lumen LED bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader, brighter road coverage; is USB rechargeable, and has 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. Elliptical beam: Elliptical beam for wide view works with spot beam for intense light in front of front wheel. Program your modes: The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu. You can do things such as control brightness, adjust runtimes and add new light modes. Charge your devices: Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @250 lumens means you can top up charge your iPhone by 10%. Charge time 3.5 hours. - What's in the pack: Light, Silicone Strap, USB Cable, Hex Key - Battery indicator - USB rechargeable - Water resistant - Light output: 450 Lumens - Power bank: 850 mAh - Dimensions: 98 x 30mm - Weight: 85g

Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles. MAXIMUM AWARENESS - Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. SUPERIOR VISIBILITY - Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. PELOTON MODE - Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode. Physical Specifications - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, peloton, night flash, day flash - Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash - Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash - ANT+: Yes - BLE: Yes - Water rating: IPX7 - Viewing angle: 220° In the box: - Varia RTL515 - Mounting Kit - Cables - Documentation

Our latest to-see-by headlight, the Flash 300 brings Flux-style beam control to a more budget-friendly pricepoint. The Flash headlight combines a clean, compact design with a simple-yet-elegant silicone strap that reminds us of a watchband design from our friends in Cupertino. With two different-sized straps included, you can dial in just the right amount of stretch to keep the Flash secure, while ensuring super fast install and removal. Now you see it, now you don't. Thanks to its 700mAh battery pack, the Flash 300 will deliver 300 lumens for 1.5 hours, all the way up to 75 lumens for 6 hours. In Flash mode, you get 150 lumens for 12 hours. - 700mAh rechargeable Li-ion battery pack is an economical choice that delivers real-world usable lumens and runtimes. Micro USB cable included. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - Flash mode: 150 lumens for 12:00 hours - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Single-LED oval beam pattern gives a perfect blend of spot and peripheral visibility. - Steady High mode: 300 lumens for 1:30 hours - Steady Low mode: 75 lumens for 6:00 hours - Steady Medium mode: 150 lumens for 3:00 hours

Our latest to-see-by headlight, the Flash 500 brings Flux-style beam control to a more budget-friendly pricepoint. The Flash headlight combines a clean, compact design with a simple-yet-elegant silicone strap that reminds us of a watchband design from our friends in Cupertino. With two different-sized straps included, you can dial in just the right amount of stretch to keep the Flash secure, while ensuring super fast install and removal. Now you see it, now you don't. Thanks to its 1400mAh battery pack, the Flash 500 will deliver 500 lumens for 2 hours, all the way up to 125 lumens for 8 hours. 250 lumens of Flash mode gives you a whopping 16 hours of runtime. - CREE XP-G3 LED delivers big-time lumens. - Class-leading 1400mAh rechargeable Li-ion battery pack to back up those lumens with real-world usable runtimes. Micro USB cable included. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - Flash mode: 250 lumens for 16:00 hours - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Single-LED oval beam pattern gives a perfect blend of spot and peripheral visibility. - Steady High mode: 500 lumens for 2:00 hours - Steady Low mode: 125 lumens for 8:00 hours - Steady Medium mode: 250 lumens for 4:00 hours

With the Flash Headlight/Taillight Combo, you're equipped with everything you need to be seen—day or night. It features up to 70 lumens in the front and 20 lumens in the rear, and it features the versatility of four light modes, ranging from steady and strong to flashing and brilliant. Increase your visibility with the Flash Headlight/Taillight Combo. - Headlight: 20- to 70-lumen output. - Headlight: 2 hours to 24 hours runtime. - Tail light: 5- to 20-lumen output. - Tail light: 2 hours to 20 hours runtime. - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays, helmets, and saddle bags. - Four headlight modes including: Steady (55 lumens), Power Flash (70 lumens), Disco Flash (55 lumens), Eco Flash (20 lumens) - Four taillight modes including: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens)

Heading out after dark and need lights? Look no further than the Flash Pack. This combo kit includes the new Flash 300 headlight with our tried-and-true Flashback taillight. See where you are going, and be seen by motorists, all the while not breaking the bank. Whether you are an all-conditions commuter or a student riding across campus, the Flash Pack has got you covered. - Single-LED headlight oval beam pattern gives a perfect blend of spot and peripheral visibility. Single-LED taillight for rear visibility. - 700 + 200mAh rechargeable Li-ion batteries charge in 2:00 hours each with included micro USB cables. - Headlight installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - O-ring mount (extra o-ring included) fits all round seatposts. - IPX7 waterproof means these lights will be there when you need them, even in the hardest rain. - White Steady High mode: 300 lumens for 1:30 hours - White Steady Medium mode: 150 lumens for 3:00 hours - White Steady Low mode: 75 lumens for 6:00 hours - White Flash mode: 150 lumens for 12:00 hours - Red Steady mode: 10 lumens for 2:00 hours - Red Power Flash mode: 20 lumens for 4:00 hours - Red Disco Flash mode: 14 lumens for 6:00 hours - Red Eco Flash mode: 5 lumens for 20:00 hours

Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II

Serious road riders put in serious miles. Most of those miles occur in the daytime, when bright ambient conditions mean you need huge lumens numbers to be seen by motorists. But there's no reason a super-bright taillight can't look the part on the fastest road bikes. You invest in the best road bike technology--you deserve an equally fast taillight. Packing a huge punch with 250 lumens, the Flux 250R taillight is visible at more than 1 mile (1.5 km) in the brightest daytime conditions. Here in Morgan Hill, California we get those conditions all the time, this is the taillight we made for ourselves, and for you. - Designed to fit round and D-shaped seatposts. - Disco Flash mode: 250 lumens for 8:00 hours - Eco Flash mode: 25 lumens for 60:00 hours - Hybrid spherical lens and Fresnel lens over three high-power LEDs to send lumens for mile, or kilometers. - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes 3 different size EPDM o-rings to fit a wide variety of seatposts. 2 o-rings included per size for spares. - Massive 1000mAh battery recharges via included micro USB cable in 2:15 hours. - Overmolded bezel for excellent side visibility. - Power Flash mode: 250 lumens for 8:00 hours - Steady High mode: 100 lumens for 3:00 hours - Steady Low mode: 25 lumens for 12:00 hours - Three CREE XBD 901 LEDs for maximum brightness and efficiency.

Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts

Increase your visibility by using the Stix Arm/Leg Band mount to attach your Specialized Stix light to arms and legs. - Includes rigid mount and fabric band for comfortable and secure hold. - Wraps around ankle to keep pant legs away from chainrings. - Increases visibility and versatility of Stix lights, both on an off the bike.

Day or night, the Stix Elite headlight packs a powerful punch. Running in Steady-High mode at night, it delivers 100 lumens of focused, strong, and bright light to guide your way. It’s a true to-see-by headlight. During the day, your visibility and safety becomes its first priority. Running in Power Flash mode, this tiny package delivers 200 lumens-worth of, “see me now,” light, making it a beacon for all road users. And depending on the chosen mode, the Stix Elite will run for up to 112 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 200 lumens output - Spherical lens delivers a to-see-by beam pattern. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 112-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with handlebars from 22.2mm up to 35mm in diameter - Six modes including: Steady High (100 lumens), Steady Low (38 lumens), Power Surge (97 lumens), Power Flash (200 lumens), Disco Flash (63 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately

Nothing says, “see me now,” louder than a strong and bright taillight, both for day or nighttime use. With its spherical lens, which directs lumens more than a 1/2 mile (800m) in the brightest California sun, the Stix Elite taillight is the go-to taillight for our infamous Lunch Ride. It’s all about peace of mind, really, and with its six light modes, you get multiple options for day or night visibility. And depending on the chosen mode, this taillight will run for up to 77 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 100 lumens output - Dome lens concentrates output from CREE XBD P4 center LED for 1/2 mile (800m) visibility in the brightest sun. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 77-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with seatposts from 22.2mm up to 35mm in diameter, plus it's compatible with most seatstays (Aero strap mount available separately) - Six operating modes: Steady High (50 lumens), Steady Low (18 lumens), Power Surge (37 lumens), Power Flash (100 lumens), Disco Flash (40 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately

Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility. - Stainless steel spring clip for secure mounting.

You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem. - Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look. - Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike. - Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.

Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.

With the Stix Switch 2-Pack, your lighting options are endless. How? The Stix Switch features the ability to switch between red and white modes with a simple, long press of the power button. So, if you need extra light up front, more visibility at the rear, or a traditional front/rear combo, the Stix Switch 2-Pack delivers. - 2 to 20-hour runtime - Headlight or taillight—you decide - Fresnel lens for maximum visibility in all directions - Red/Green battery charge level indicator - Three white modes: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens) - Five red modes: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays - Additional mounting options available (sold separately)

A true two-in-one, the Stix Switch comes at you with a ying/yang mindset, flipping between red or white modes depending on your ride needs. Simply press and hold the button and you can go from a bright red taillight to a simple white headlight in seconds. Increase visibility and flexibility with the Stix Switch. - Headlight or taillight—you decide. - Press-and-hold for two seconds to shift between white and red modes. - Three white modes including: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens). - Five red modes including: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - 2- to 20-hour runtime. - Fresnel lens for maximum visibility in all directions. - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed). - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays. (Aero strap mount available separately). - Red/Green battery charge level indicator. - Additional mounting options available separately.

Use Light & Motion's 2.0A USB AC Adapter to charge your light with a USB cable, using a standard wall outlet. - Compatible with: Urban, Vis, Solite, Taz, GoBe

Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module. - Compatible with Nip e-Bike Headlights

The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights

Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.

Seca 2000 builds on the world’s most popular trail light family in a cost-effective solution that is reliable, durable, and features a trail-optimized beam pattern that is unmatched in the market. Robust waterproof construction, custom optics, enhanced firmware, and GoPro mount compatibility further the Seca’s reputation. The 2000 Race comes standard with the lightweight 3-cell battery pack that is perfect for the after-work ride. Features - 2000 Lumen output certified to the FL-1 Standard - Premium illumination from a 4 LED array with industry leading CREE LEDs - Custom engineered reflector/optics diffuses flood LED to provide ultra-wide beam pattern and focuses spot LEDs to maximize forward visibility - Advanced electronics with custom firmware keeps lumen output from sudden drops - Additional ‘Race Mode’ feature enables riders to conveniently toggle between high and medium output - Illuminated power button with low-runtime indicator and enhanced tactile engagement specifically for gloves - Waterproof design provides all-weather reliability (submersible up to 1 meter with battery connected) - Multiple mounting options include helmet, handlebar, and GoPro interface Specifications - Lumens: 2000 (high), 1000 (medium), 500 (low), 500 (pulse) - Runtime: 90 min (high), 180 min (medium), 360 min (low), 720 min (pulse) - Beam Angle: 25° (spot) - Charge Time: 150 min

Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.

The best taillight mounting solution available! Mount your Tuck e-Bike taillight on the seat rails, effectively placing the rear light on the highest (and most visible) part of the bike. Easily attaches to seat rails and has ball-and-socket adjustment to perfectly angle the rear light. - Compatible with Tuck e-Bike taillight

Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.

This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.

Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.

Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Vis Adventure's powerfully focused beam and compact size make for a versatile light that can be used for any outdoor sport. It is perfectly designed to run on your helmet, bars, or anywhere you can fit a GoPro mount. Designed to maximize output in a compact design, the Vis Trail features an optimized reflector to make the beam broader and smoother without hotspots. Paired with either a 2, 3, or 6-cell interchangeable external battery, the Vis Trail gives you the flexibility to achieve the runtime you desire for the right price. This light is built for long gravel races, steep snowy slopes, and any adventure you throw at it. Charger not included and must be purchased separately. Key Features - 800 lumen output certified to the FL-1 Standard - Highest rated CREE LED - Custom engineered LED optics create a smooth, even beam pattern - Waterproof design provides all-weather reliability (submersible up to 1 meter) - 50" cord provides plenty of length for any setup requirement - Illuminated power button with low-runtime indicator - Compatible with 2, 3, and 6 cell batteries - Multiple mount options available including GoPro adapter - Additional one-touch 'Race Mode' feature enables riders to conveniently toggle between high and medium output Tech Specs - Lumen Output: High (800), Medium (400), Low (200), Pulse (200) - Beam Angle: 20° (spot) - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter - Impact Resistance (FL-1): 1 meter - Thermal Management: Passive Cooling - Fast Charge: False - Product Dimensions: 2.5'' x 1.2'' x 1.2''

The most advanced front/rear cycling light combo available. The Connect Smart Pair comes equipped with our Smart Connect wireless technology. This pair of lights can be quickly programmed and customized by the companion LED Ally phone app. Once programmed and paired, the front light wirelessly controls the rear light when toggling through its modes. Setup only the modes you need, and up to four mode-sets for whatever type of riding is planned, day or night. Front A powerful, multi-purpose front light with up to 1000 lumens of output. Its machined aluminum body is lightweight, super-rugged and heat-dissipating. It features eight output modes, with a class-leading 1000 lumen Daytime Flash mode. With its MOR (Maximum Optical Reflection) lens, light output is optimized and evenly dispersed. And its versatile strap securely mounts to a variety of bar shapes and sizes. Rear Powerful and versatile cycling taillight with a highly visible 75 lumen Daytime Flash mode. Its construction features a light and durable co-molded design that’s IPX7 (waterproof) rated. It has six output modes, and features our Wide Angle Optics for up to 270° of visibility. The KTV Smart 75 is compatible with round or aero posts, and it has an integrated cable-free recharging USB stick. Specs - Max Lumens: 1000 (front) / 75 (rear) - Weight: 153g (front) / 45g (rear) - Max Runtime: 87 Hours (front) / 19:30 Hours (rear) - Recharge Time: 5:30 Hours (front) / 2:15 Hours (rear)

Featuring 800 lumens of crystal-clear illumination, the Lite Pro 800 Switch (High Volt) e-bike cycling light maximizes usable output with its enhanced Maximum Optical Reflection (MOR) lens while a compact CNC-machined aluminum body is equipped with cooling fins to maximize heat dissipation. Compatible with higher-voltage e-bike inputs (12-48v), the Lite Pro draws 8 watts during operation and easily plugs into batteries from top makers including Bosch, Shimano, and Yamaha. An integrated remote switch simplifies operation while the inclusion of both an e-bike stem mount and aluminum CNC fork mount maximize the light's versatility. A 130cm power cable is included. - Max Lumens: 800 - Weight: 173g

High-performance e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 1,000 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 - 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes a Direct X-Lock and aluminum CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 1000 - Dimensions: 44.5 x 41 x 31mm / 1.75 x 1.61 x 1.22"

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultra-high-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 500 - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98"

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make/model/battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. Disclaimer: Direct X-Lock Mounting System Not compatible with all stems. Please see installation manual for stem compatibility. - 500 Lumens - Includes aluminum CNC fork and E-BIKE Stem mount - Enhanced Maximum Optical Reflection (MOR) lens - E-bike compatible 12 – 48V input - 130 cm power cable included - IPX7 water resistant - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98" Motor Compatibility - Bosch: 6V, 12V - Shimano: E5000, E7000, E6100, E6110, E9000, E8000, E8080, E6002, E6012 - Yamaha: PWse - BionX - Brose Drive S (2018) - Continental: 48V Prime, 48V Revolution

The E-Bike Orbis StVZO E600 is an advanced StVZO certified e-bike cycling front light delivering 600 lumens of output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 13W Daytime Running Lights. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 600 lumens - StVZO-Optimized lens - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 13W DRL - Versatile E-bike system compatibility - 130cm power cable with BES3 BOSCH connector included

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

Lezyne Ebike Classic Stvzo E500 Headlight; An advanced StVZO certified e-bike cycling headlight. This light is housed in a high-quality machined aluminum body with computerized thermal management to maximize lumen output efficiency. Running on cutting-edge programming, this light offers up to an impressive 500 lumens of output. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 7.5w. Download the manual below for further installation and compatibility. - 500 lumen - STVZO optimized lens - 130cm cable - Forward center mount and hardware

Lezyne Ebike Classic Stvzo E800: A highly advanced StVZO certified e-bike cycling headlight. This light is housed in a beautifully machined aluminum body with computerized thermal management to maximize lumen output efficiency. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes—500 lumens or 800 lumens—on-the-go via a handlebar mounted button. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 7.5w LB / 13w HB. Download the manual below for further installation and compatibility details. - 500 lumen front ebike light with 800 lumen high beam mode - STVZO optimized lens - 130cm cable - Aluminum fork mount

Lezyne replacement mounts for ebike lights.

Lezyne Ebike Super Bright Alert Taillight: Powerful, low-profile StVZO certified e-bike taillight with custom-programmed Alert Technology. It features 10 high-output emitters that provide a constant 12 lumens and then 24 lumens when deceleration is detected. Its co-molded design is constructed from durable Composite Matrix material, which provides an IPX7 waterproof rating. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Stainless steel mounting hardware is included. Compatibility: 6 – 12v input, 1.2w / 2.4w (Alert mode). Download the manual below for further installation and compatibility details. - Alert" brake light function - STVZO optimized lens - 130cm cable - Includes stainless steel hardware

Lezyne Ebike Super E1000 Headlight: One of the most powerful and advanced StVZO certified e-bike cycling headlights, this light is housed in an expertly machined aluminum body with cooling fins that are engineered to maximize lumen output efficiency. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes—600 lumens or 1000 lumens—on-the-go via a handlebar mounted button. Thermal management is built into the programming, and it comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 8.5w LB / 16w HB. Download the manual below for further installation and compatibility details. - 600 lumen with 1000 lumen high beam mode - STVZO optimized lens - 130cm cable - Aluminum fork mount, forward center mount, and hardware