Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Brakes/Levers/Pads
$93.00
Smooth, powerful braking performance that's simple to set up and easy to adjust. Bad weather or rough roads? Not even a factor with BB7's reliable mechanical performance. Compatible RED, Force, Rival and Apex levers.
- Road-specific
- Mechanical simplicity
- Adjustability
$44.00 - $55.00
Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.
$105.00
The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop.
- Streamlined form optimized for road use
- CenterLine track offers quiet brake operation
- Two-piece design reduces weight
$113.00
Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system.
- Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss
- Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power
- MatchMaker compatible for a clean and simplified look
- Ambidextrous lever mount design
- Lightweight 4-piston dual-diameter caliper
- Includes steel-backed organic pads
- Front includes 950mm hose
- Rear includes 1800mm hose
$50.00 - $65.00
- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation
- New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint
- HS2 is more powerful, and quieter rotor with best-in-class heat management
$53.00 - $69.00
- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation
- New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint
- HS2 is more powerful, and quieter rotor with best-in-class heat management
- Hub Compatibility: Center Lock
- Disc Material: Steel
$27.00
Original equipment pads for no-compromise disc brake performance.
- Steel backed organic pad is quiet
- Each pad kit includes two pads, a pad spreader spring, guide pin and clip
- For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road
$43.00 - $54.00
Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance.
- Designed for road use
- Paceline brake track offers quiet brake operation
$41.00
SRAM's Pad Inserts for carbon wheels are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary yellow compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.
$139.00 - $285.00
Security at your fingertips with a fresh look to compliment SRAM RED eTap componentry. SRAM RED brakes won’t slow you down. Until you’re ready. That’s why the SRAM RED brakeset has been created with a host of wind-cheating features to make the brake body more aerodynamic, helping you keep your speed until the moment you’‘re ready. The patented AeroLink arm reduces frontal area while improving braking performance and modulation. The brake body, with updated graphics, has been sculpted to provide a sleek aerodynamic profile to the wind. Even the smallest details, like the barrel adjuster, point away from the wind. And to finish off the package, SwissStop Flash Pro pads come standard with the brake. It’s a better brake in every way.
- AeroLink arm amplifies braking power while reducing frontal area
- Compatible with SRAM RED eTap components
- Lighter, aero pad retainers carry SwissStop Flash Pro pads standard
- Aero design extends to the shape of the indexed four-position quick release
- Wider clearance for modern wheelsets
$260.00
Wireless shifting and the best hydraulic disc braking anywhere, plus revolutionary eTap shift logic. What more could you want? While we could have stopped there, we went further and optimized the hood shape to fit hands of all sizes for comfortable and controlled braking from any position. AXS technology means personalization is in your hands.
- AXS-enabled for easy personalization
- Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability
- Optimized hood shape fits a wider range of hand sizes
- Textured shift paddles and hoods for control and comfort
- Reach Adjust to personalize fit for more hand sizes
$25.00 - $35.00
SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD).
- For use with Level Ultimate & Level TLM Brakes
- Pad Material: Organic
- Type: Road/CX
- Includes guide pin, clip, & pad spreader
$25.00 - $30.00
SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.
$42.00
With comfortable hoods and lightweight aluminum levers, SRAM's 500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.
$84.00
With comfortable hoods and lightweight aluminum levers, SRAM's S500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.
$142.00
Just because you eschew gears doesn't mean you're willing to settle for heavy, retro brake levers. Welcome to single speed paradise with SRAM's 900 Single Speed Brake Levers. The unidirectional carbon levers are impressively light and SRAM's renowned ergonomic hoods are always comfy. Set up your single speed rig right with SRAM's 900 brake levers.
$164.00
The built-in adjustability of SRAM's 990 Aero Brake Levers makes it easy to achieve your preferred braking feel on almost any aerobar setup. A turn of a 2mm Allen key frees the lever to spin, allowing the user to make up to 8mm’s of inward or outward adjustment to their brake calipers. Such wide adjustability makes it easy to fine-tune hard to reach brakes on the most innovative triathlon and time trial machines.
$231.00
The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride.
- Uses DOT 5.1 brake fluid
- Lever body design offers excellent finger wrap, comfort, and control
- Forged aluminum disc caliper with steel-backed organic pads and steel hardware
- Two piston hydraulic caliper
- Moto-style means this is a left-side lever with a rear brake, the reverse of the normal American-style.
- Front brake hose length is 950mm, rear brake hose length is 1800mm
$289.00
The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride.
Mated to a HYDROR brake lever is a DoubleTap 11-speed shift lever, built to provide accurate shifting that you can rely on no matter where you ride.
- SRAM Road ExactActuation 11-speed compatible
- Uses DOT 5.1 brake fluid
- Caliper available in both 74mm and Flat Mount versions
- Lever body design offers excellent finger wrap, comfort and control
- Easily converts between 160mm and 140mm rotors with adaptor brackets
- Forged aluminum disc caliper with steel-backed organic pads and steel hardware
- Two piston hydraulic caliper
- Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style.
- Front brake hose length is 950mm, rear brake hose length is 1800mm
$61.00
When you choose to ride, advancement means having a group that’s always ready. Apex 1 is that group. As a left lever for your Apex 1 setup, or paired for single speed adventures, the Apex mechanical brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer.
- ErgoFit design from SRAM RED improves grip and finger wrap
- Reach Adjust for a perfect fit
- Durable, forged aluminum lever blade with laser texture for a positive touch
$32.00
SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.
$64.00 - $128.00
As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders.
- Weight: 260 grams per lever (no cables)
- Lever Material: Aluminum
- Finish: Black
- Adjustment: Reach Adjust
$72.00 - $84.00
SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.
$62.00 - $66.00
CenterLine X rotors are the lighter weight version of SRAM's quiet, smooth, and robust CenterLine rotors. The CenterLine X rotor features a two-piece design with an alloy center and steel brake track. Rounded edges make for easier wheel installs and are UCI-compliant.
- Compatible with both road and mountain bike brakes
- Lightweight, two-piece design
- Rounded edges are UCI-compliant and allow for easier wheel installs
- Hub interface: 6-bolt
- Includes Steel rotor bolts
$87.00
The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop.
- Streamlined form optimized for road use
- CenterLine track offers quiet brake operation
- Two-piece design reduces weight
- Includes stainless steel rotor bolts
$47.00 - $53.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant.
- Compatible with both road and mountain bike brakes
- Rounded edges are UCI-compliant and allow for easier wheel installs
- Hub interface: CenterLock
- Rotor Type: Centerline
$59.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant.
- Rounded edges are UCI-compliant and allow for easier wheel installs
- Compatible with both road and mountain bike brakes
- Includes steel rotor bolts
$185.00
Our legendary full-powered brake now features a new technology to improve your cockpit aesthetic: Stealth. The all-new lever body design brings the hose closer to the bar, allowing for a sleeker, more modern ride. And for ease of customization, Code Bronze features tool-free Reach Adjust. Control is everything, and better rides begin with the confidence that your brakes will be the same, every time.
- Stealth body design to complement our AXS cockpit
- Designed for the most heavy-duty braking needs
- Metallic pads come standard for more power and longer wear
- Utilizes SwingLink for a fatigue-free ride
$141.00
- Disc brake caliber assembly
- Assembled
- No hose
- Code R B1/RSC A1
$264.00
Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power.
- Designed specifically for heavy-duty demands.
- Pivot bearing offers crisp lever feel and a fatigue-free ride.
- Metallic pads come standard for more power and longer wear.
Page 1 of 3
Next page